GL Announces TDM, Optical and Packet Integrated Platform for Test and Measurement
GL Communications Inc., announced today its TDM, Optical and Packet Integrated platform for Test and Measurement referred to as mTOP™ platform.
- (1888PressRelease) April 19, 2018 - Gaithersburg, Maryland, USA - GL Communications Inc., announced today its TDM, Optical and Packet Integrated platform for Test and Measurement referred to as mTOP™ platform.
Speaking to the press, Mr.Vijay Kulkarni, the CEO of the company said, “The new Multiple TDM, Optical and Packet (mTOP™) rack enclosure can house any combination of USB based test equipment – PacketExpert™, tProbe™ (T1 E1), USB T3 E3, Dual UTAs, & LightSpeed1000™ to support multiple interfaces in a compact rack space. mTOP™ systems not only provide space efficiency, but also account for easier scalability and reduced licensing cost per port.”
He added, “Each mTOP™ enclosure is a sleek 1U or 2U enclosure with the ability to support up to three GL USB based test hardware units. For scalability a secondary mTOP™, also housing three GL USB based test units can be connected to the primary mTOP™ using same software and licenses. Mixing different GL USB based test equipment (any TDM/Optical/Packet combinations) within same mTOP™ is also possible.”
Mr. Kulkarni further explained, “VQuad™ mTOP™ solution is an all-in-one self-contained VQuad™ with Dual UTA HD test instrument designed for conveniently testing up to 12 independent telephony devices including Analog 2-wire FXO, Analog 4-wire, Phone Handset (RJ22), Mobile Radio with PTT, and Mobile Phone (Smartphone/Handset) for a variety of testing and analysis.
The VQuad™ solution supports Wireless as well as 2-Wire and 4-wire analog calls using same hardware. User can perform simultaneous Voice, Video, Data, Fax, and Time Delay Measurements from a single VQuad™ mTOP test solution - greatly reducing the licensing costs per device.
Almost all of T1 E1 and T3 E3 Testers can be accommodated into rack-based units. Multiple rack units can be stacked together for greater scalability.
High Density PacketExpert™ of 12/24 GigE ports form factor solution are used for testing multi-port switches, routers and networks end-to-end. Each of the 12/24 GigE port supports auto‐negotiation and flow control. The chassis comprises of both electrical and optical (fiber) interfaces. The Electrical ports can operate up to 10/100/1000 Mbps line rates in Full Duplex mode, while Optical ports can operate up to 1000 Mbps line rate in Full Duplex mode. A single PacketExpert™ mTOP™ test solution with stacked rack units greatly reduces the licensing costs per device.”
He added, “mTOP™ can also provide for unified testing experience of Ethernet /IP, TDM and Optical technologies. It can perform as an all-in-one performance analysis tool allowing tests to be performed at any end points.”
Important VQuad™ mTOP™ Solution features
•Support up to 12 simultaneous and independent ports
•Configure Dual UTA HD devices as Analog FXO, Analog 4-wire (Headset), Bluetooth (Mobile phone), Mobile Radio with PTT, or Phone Handset (RJ22)
•Provides full Automation using VQuad™ scripting and Remote operation using CLI and API
•Supports Call metrics such as Call Failure, Call Drop, and Call ID
•Supports Audio analysis including VQT POLQA, Delay Measurements, Signal/Noise Level, RMS Power, Frequency Response, Audio Dropout Analysis
•Dual UTA HD supports NB, WB and SWB audio
•Mobile Testing supports any mobile phone as well as all networks (including VoLTE and 5G)
•All Results/Events sent to Central Database and accessed via WebViewer™
Important mTOP™ T3 T1 E3 E1 Testers features
•Analysis/Emulation of T3 (44.736 Mbps) and E3 (34.368 Mbps)
•Analysis/Emulation of ATM, PPP, HDLC, and Frame Relay signalling
•Record / Playback of entire T3 or E3
•Monitoring & generating alarms, and error insertion
•Analysis of all 28 T1s (1.544 Mbps each) per T3 port, or 16 E1s (2.048 Mbps each) per E3
port in Channelized mode
•Analysis of Fractional T1s and E1s, N x T1s or N x E1s
•Analysis of any combination of DS0s (64 kbps each) within the T1s or E1s ( for example, each
T3 port has 28 x 24 = 670 DS0s for T1 or 21 x 32 = 672 DS0s for E1) with additional applications, such as record-only, one can even record traffic at DS0 levels
•Support for all T1 E1 "basic applications" and "special applications"
•Monitor the T1 E1 line conditions such as frame errors, violations, alarms, frequency, power
level, and clock (or frame/bit) slips
•Comprehensive Analysis / Emulation of Voice, Data, Fax, Protocol, Analog, and Digital
signals, including Echo and Voice Quality testing
Important mTOP™ Ethernet Tester features
•High density Ethernet Ports with 12 or 24 ports. Stack multiple HD-PacketExpert™ unit to handle large number of ports
•Selective-Port Loopback and Wire speed BER Testing
•Wire-speed BERT, RFC 2544, Loopback, and WAN Link Emulation
•Layer 1, Framed Ethernet (Layer 2), Stacked MPLS (Layer 2.5), IP (Layer 3), and UDP Layer 4)
•User selectable Electrical and/or Optical interface for Port2 and Port3 allows mixed technology testing
•Generate and capture Ethernet traffic on Electrical (up to 10/100/1000 Mbps) and Optical (1 Gbps) interfaces
•All interfaces can run simultaneously and independently
•Detailed frame statistics in tabular format for all the ports
•Command Line Interfaces – Console based CLI, Client-Server based CLI, WCS ( Windows Client/Server), or via TCL or Python clients using MAPS™ CLI Server, allowing remote control
•Real-time results are presented per port and all-port basis in both tabular as well as graphical formats
•Consolidated detailed test result reports for all the ports on all the devices in PDF and CSV file formats
About GL Communications Inc.,
GL Communications Inc, is a global provider of test and measurement solutions and has over the years worked with major telecom equipment vendors, service providers, and system integrators to meet the testing requirements arising at various stages of telecom products development life cycle.
GL offers a broad set of test solutions that help perform all types of testing on networks, from initial system design, to fine-tuning, troubleshooting, live deployment, and monitoring. The products are widely used to verify and ensure 'quality and reliability' of Wireless (4G LTE, 3G, 2G), SONET/SDH, IP, TDM, and PSTN networks.
GL core product development is backed by a strong team of R&D experts to match evolving market and technical challenges in a most cost-effective and innovative way.
Contact:
Shelley Sharma
Phone: 301-670-4784
E-mail: info at gl.com
###
space
space
Satisfied Users & 
Approved Press Releases
Print
Email
Report Spam