GL Announces Enhanced PacketCheck(TM) w/ Stacked VLAN, MPLS and XML Reports
GL Communications Inc. announced today the release of its enhanced PacketCheckTM - a Software Based Ethernet Tester.
- (1888PressRelease) December 18, 2012 - Speaking to reporters, Mr. Vijay Kulkarni CEO of the company said, "GL's enhanced PacketCheck™ is a complete PC based Ethernet / IP test tool with BERT, Throughput, Delay, and Impairment testing functions. It is very easy to use as a general-purpose network performance analysis tool for 10Mbps, 100Mbps and 1Gbps LANs and WANs. Throughput up to 800 Mbps can be easily tested."
He explained new feature introduced, "PacketCheckTM applications' One-Way Delay - [within the same PC] is defined as the time a packet takes to travel from source to destination. It determines One-way Delay - [within the same PC] measurements between two NIC cards on a single PC with 2 instances of
PacketCheck™ running, one on each NIC card in microsecond accuracy.
The feature Stacked VLAN allows different hosts to be a part of the same virtual LAN irrespective of their physical location. A group of hosts connected to the same switch can be partitioned into several VLANs, or a group of hosts connected to different switches can be combined into a single VLAN.
Stacked MPLS feature supports stacked MPLS layers up to 3 levels, customizable with headers like Label, CoS, TTL.
The application now supports True Bit error rate testing (BERT) on layer 1, layer 2, layer 2.5, layer 3, and layer 4 with various measurements - Bit Error Rate, Sync Loss Count, Bit Error Count, and more. Its capability to generate/respond to ARP requests making it easy to work with Routers. ARP packets are sent to determine the MAC address of the destination.
The application supports Common Statistics and Stream Specific Statistics. Common Statistics are stream independent at the NIC card level. These statistics are gathered before stream level statistics processing and these statistics helps user to check if the NIC card is receiving any traffic, and if receiving, if it is non-test traffic i.e. traffic not belonging to any of the configured streams.
Stream Specific Statistics provide per stream measurement of throughput, round trip delay (RTD), one way delay (OWD)- [within the same PC], total packets, packet loss, out of sequence frames, error frames, correct pattern frames, pattern sync status, bit error rate, sync loss count, error count etc.
Report generation feature now supports both XML and PDF formats. Reports include information such as the Statistics, Configuration Information, NIC card details, Stream Statistics, Common Statistics, VLAN, MPLS, etc with customizable headers and footers. Users can include their comments and logo in the report."
Mr. Kulkarni further added, "We hope our enhanced PacketCheckTM provides immense value in software based Ethernet testing and its user community."
Other features include:
Bit Error Rate and Performance Statistics
HDL File Playback
Traffic Generation Modes
Impairments Generation
PacketCheck™ Command Line Interface
About GL Communications Inc.,
Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, IP and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.
GL's TDM Analysis & Emulation line of products includes T1, E1, T3, E3, OC-3, OC-12, STM-1, STM-4, analog four-wire, and analog two-wire interface cards, external portable pods, and complete system solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (ISDN, SS7, GR-303, Frame Relay, HDLC, V5.X, ATM, GSM, GPRS, LTE, etc.), and with capacities up to thousands of channels. Our newest products provide astonishing capacity and capture capability up to and including gigabit speeds.
GL's VoIP and IP products generate / analyze thousands of calls and traffic simultaneously with traffic types such as frames, packets, voice files, digits, video, tones, noise, and fax. Almost all codecs are supported including G.711, G.729, AMR, EVRC-A,B,C, GSM, iSAC, and many more. Additional features include visual analysis, real-time listening, and recording. The product line also includes Ethernet / IP Testing capability that simulates and checks frame transport and throughput parameters of Ethernet and IP networks, including delay, errors and other impairments.
GL's Voice Quality Testing (VQT) product line complements all of GL's products. Using ITU-standard algorithms (PAMS, PSQM, and PESQ), GL's VQT provides a widely accepted solution for assessing voice quality in the telecom industry. Voice Quality Testing across multiple networks (T1, E1, T3, E3, OC-3, OC-12, VoIP, Wireless, and Landline) are all available.
GL's Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and LTE networks. Connections can be made to any wireless phone with automated call control, GPS mapping and real-time signal measurements.
GL's Echo Canceller testing solutions provide the broadest range of simulation and analysis, including line and acoustic echo. GL's compliance testing per G.168. G.167, and P.340 across TDM, IP, VoIP and Wireless networks is widely accepted in the industry.
GL's wireless VQT solutions help assessing impairments to voice quality such as poor mobile phone quality, voice compression and decompression algorithms, delay, loss and gain in speech levels, noise, acoustic and landline echo, and other distortions are easily assessed and accurately measured.
GL's Handheld data testers can test a wide variety of communications facilities and equipment including T1, fractional T1, E1, fractional E1, T3 and E3 modems, multiplexers, CSU, DSUs, T1 CSUs, DTUs, NTUs and TIUs and more. The testers provide convenience, economy, and portability for almost any interface, including RS232, RS-422, RS-530, X.21, T1, E1, T3, E3, and many others.
GL's Network Surveillance and Monitoring products include Probes for TDM, IP, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network characteristics. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.
###
space
space
Satisfied Users & 
Approved Press Releases
Print
Email
Report Spam